|
Building DPV
|
|
01-27-2003, 03:48 PM,
|
|||
|
|||
|
Re:Building DPV
Unless you have a very thorough background in engineering and manufacturing I would not recommend tackeling this project. There are some plans that you can buy for like $25 online, but most of those designs perform very poorly, and are only depth rated to 30ft. You can find used Tekna's for sale for about $800, which are rated to about 150ft and will run close to an hour with new batteries. That's definitely a lot cheaper than any homemade design with the same specs.
If you do have the abovementioned background, you could tackle the development of a deep tow-behind scooter a la Gavin or SS, but you'll be looking at about $2800 in parts and manufacturing. |
|||
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Building DPV - by Richie - 01-27-2003, 02:46 PM
Re:Building DPV - by DRE - 01-27-2003, 03:48 PM
Re:Building DPV - by Richie - 01-27-2003, 04:41 PM
Re:Building DPV - by DRE - 01-27-2003, 04:57 PM
Re:Building DPV - by Richie - 01-27-2003, 05:10 PM
Re:Building DPV - by freedivernd - 01-27-2003, 08:19 PM
Re:Building DPV - by DRE - 01-27-2003, 10:20 PM
Re:Building DPV - by Richie - 01-28-2003, 01:23 PM
Re:Building DPV - by freedivernd - 01-28-2003, 03:01 PM
Re:Building DPV - by Richie - 01-28-2003, 03:09 PM
Re:Building DPV - by jasondbaker - 01-28-2003, 06:13 PM
Re:Building DPV - by DRE - 01-28-2003, 08:58 PM
Re:Building DPV - by tbrown - 01-28-2003, 10:34 PM
Re:Building DPV - by gp - 01-29-2003, 06:38 AM
Re:Building DPV - by Richie - 01-29-2003, 11:40 AM
Re:Building DPV - by tcjtn0 - 01-29-2003, 01:21 PM
Re:Building DPV - by prop - 02-03-2003, 04:33 PM
|
Users browsing this thread: 2 Guest(s)