|
13 mm Hex Key
|
|
06-08-2004, 08:37 AM,
(This post was last modified: 06-08-2004, 08:45 AM by Mark Y.)
|
|||
|
|||
|
13 mm Hex Key
I've had recent issue with the Oxygen Manual Inflator Assembly on my Inspiration - it would become loose and allow small amounts of water into the lung, nothing dangerous, just annoying. >
 The assembly (AP35E - Cylinder Post Base, AP35D - Lock Ring & AP35L - Inner Locking Ring) can be tightened by hand or by a 13 mm hex key. As it turns out, the assembly locks counter-clockwise, which took me awhile to figure out. Well, the assembly would loosen if only hand tight, so I looked to purchase a 13 mm hex key. It is not a stock hardware item. ??? I'll get to the point: a 13 mm hex key is rather difficult to find. I eventually found one, for about $31 (including S/H) from BTI Inc. (Better Tools For Industry). Phone number: 619-562-3071. Or, if you need to, you can use mine. ;D
'C'mon, c'mon! What're you waiting for? Daddy needs his medicine...' ~ Capt. Murphy
|
|||
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
13 mm Hex Key - by Mark Y - 06-08-2004, 08:37 AM
Re:13 mm Hex Key - by Inspirationdiver - 06-08-2004, 09:11 AM
Re:13 mm Hex Key - by Mark Y - 06-08-2004, 10:43 AM
Re:13 mm Hex Key - by john j - 06-08-2004, 11:51 AM
|
Users browsing this thread: 2 Guest(s)