Remember me
Lost Password Register


P-Valve quick disconnect
02-12-2007, 06:08 PM, (This post was last modified: 02-12-2007, 06:29 PM by LKunze.)
#1
P-Valve quick disconnect
For anyone interested in making a quick disconnect for their p-valves below is a parts list from McMaster-Carr.  It consists of two barbed hose connectors.  I just rigged mine up today.  This is much nicer when you want to get out of your suit between dives.  Wink

Here's the parts list from McMaster :

5012K83 Acetal Quick-Disconnect Tube Coupling, Socket For 3/8" Tube Id, 1/4" Coupler, Shut-Off 1 Each
This one goes on the hose connected to the suit. It shuts off when disconnected so if you are using a balanced valve and it fails or if you are using an unbalanced valve with the bolt screwed out your suit won't flood.

5012K72 Acetal Quick-Disconnect Tube Coupling, Plug For 3/8"TUBE Id, 1/4" Coupler, Straight Thru 1 Each
This one goes on the condom catheter.
Reply
02-12-2007, 06:35 PM,
#2
Re: P-Valve quick disconnect
yyeeeoooooowww Lonnie.....

.....is it just me
or somehow do the
words "Barbed"
and "Peevalve" just
not belong
together
in the same paragraph!?
:'(

Let's
find
another
topic,
shall we?
Big Grin
                               

   
   
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)