ICSD New Shipwreck Challenge...

[Shooter]

We tried to "grind"  ;D out some more wrecks on sat, but conditions were less than favorable. I had always heard about Grindstone lake, and finally got to dive it. Although we were unable to find anything to put numbers on the table, but we liked finding some pretty wild structure! Would recommend diving out of a boat on this lake as the access is pretty far away from any good dive sites. I would like to dive here again in the late fall when visability might be better. It was very mooky  :o. Especially after seeing the caves, overhead structure, multiple spider wire entanglements, and the stainless steel cable! As much as I wanted to recover the down rigger, I was very careful with it as I don't think my shears would have been able to cut through the steel cable.  I sent the body of the rigger up to eliminate the excess cable and was going to follow the cable down to free the weight. After I checked the tension on the surface it was free! John "found" it when I was at the surface ;D, and he beat me to its fishing pole! We did end up running into to each other a couple of times as we were working the ledge back and forth. The video turned out better than I expected. Nice job John! I would rate this dive a 5, due to vis, with a pucker factor of 5. I thoroughly enjoyed "finding"  myself on this dive.

Dive,Dive,Dive!

PS  1 canon downrigger for sale $100. Same item new $300. needs new base plate $25. everything works good