DIY Weights
|
03-03-2011, 09:32 PM,
|
|||
|
|||
Re: DIY Weights
I have only made them with lead. I took a 20# LP cylinder and cut it in half for a melting pot, and used a turkey fryer heater stand for heating it. Yes, the tank was empty when I took the chopsaw to it. :o I didn't use a respirator, but will next time. I melted them in my garage with the doors and windows open. I will only be doing it outside from now on. I did get tested for lead after doing it in my garage. The test came back elevated, but not to the level to worry about. Lesson learned! |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
DIY Weights - by Arkman - 03-03-2011, 02:22 PM
Re: DIY Weights - by Gravybird - 06-08-2011, 08:54 PM
Re: DIY Weights - by popolarbear - 08-19-2011, 06:37 AM
Re: DIY Weights - by scubafreek864 - 03-03-2011, 07:27 PM
Re: DIY Weights - by Arkman - 03-03-2011, 08:41 PM
Re: DIY Weights - by scubafreek864 - 03-03-2011, 09:00 PM
Re: DIY Weights - by DetectorGuy - 03-03-2011, 09:20 PM
Re: DIY Weights - by dwitt2n - 03-03-2011, 09:21 PM
Re: DIY Weights - by DetectorGuy - 03-03-2011, 09:28 PM
Re: DIY Weights - by scubafreek864 - 03-03-2011, 09:32 PM
Re: DIY Weights - by arcFlash - 03-04-2011, 09:55 AM
Re: DIY Weights - by ballfrog - 03-07-2011, 08:14 PM
Re: DIY Weights - by Indigo Blues - 03-08-2011, 07:59 AM
Re: DIY Weights - by arcFlash - 03-08-2011, 11:33 AM
Re: DIY Weights - by Arkman - 03-08-2011, 02:45 PM
Re: DIY Weights - by arcFlash - 03-08-2011, 05:09 PM
Re: DIY Weights - by DiverQueen - 03-08-2011, 07:02 PM
Re: DIY Weights - by arcFlash - 03-08-2011, 08:19 PM
Re: DIY Weights - by leadking - 03-09-2011, 12:19 PM
|
Users browsing this thread: 1 Guest(s)