|
Icing chain saws
|
|
08-19-2011, 09:43 AM,
|
|||
|
|||
|
Re: Icing chain saws
John Grind everyother tooth off! It makes all the difference! water is a big Resistance factor!
My Ice saw has no raker's an every other tooth missing! I think I cut my angles at 25 degrees too! don't hold me on that one though!
TDI Advance Nitrox an Deco Trimix an Cave
|
|||
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Icing chain saws - by Terry - 08-12-2011, 07:43 AM
Re: Icing chain saws - by Hydro - 08-12-2011, 08:20 AM
Re: Icing chain saws - by popolarbear - 08-18-2011, 06:03 PM
Re: Icing chain saws - by mcdiver - 08-18-2011, 07:41 PM
Re: Icing chain saws - by Hydro - 08-18-2011, 09:40 PM
Re: Icing chain saws - by Terry - 08-18-2011, 10:11 PM
Re: Icing chain saws - by popolarbear - 08-19-2011, 06:30 AM
Re: Icing chain saws - by DetectorGuy - 08-19-2011, 09:24 AM
Re: Icing chain saws - by jeffberry - 08-19-2011, 09:43 AM
Re: Icing chain saws - by Terry - 08-19-2011, 01:56 PM
Re: Icing chain saws - by arcFlash - 08-19-2011, 03:29 PM
Re: Icing chain saws - by AandA - 08-21-2011, 02:25 PM
Re: Icing chain saws - by Terry - 08-21-2011, 07:49 PM
Re: Icing chain saws - by arcFlash - 08-22-2011, 08:25 AM
|
Users browsing this thread: 1 Guest(s)